New Products
PolyPhaser Corporation is continually adding new products to our extensive lightning protection product line. Check back often for more updates, or sign-up for our newsletter for automatic notification.
New Product Releases:
PosiGuard™
CellGuard™
GigaGuard™
AirSmart™
SurgeBuss™
SpikeGuard™
PolyPhaser Corporation's new PosiGuard™ coaxial surge suppressors protect radio equipment from lightning damage.
These devices are bulkhead mounted, 50 Ohm, dc-block short, 800 - 1,000 MHz and 1,800 - 2,000 MHz with Din connectors, and exhibit excellent return loss better than (26dB) and insertion loss (0.2dB) characteristics.
The PosiGuard™ is a bi-directional device and is smaller, lighter, and has more bandwidth than a quarter-wave stub.
PolyPhaser Corporation's new CellGuard™ GPS surge protectors protect GPS equipment from lightning damage.
The devices are bulkhead mounted, 50 Ohm, dc-pass, 1,250 - 2,100 MHz with N & Din connectors, and exhibits
excellent VSWR less than or equal to (1.2:1) and insertion loss less than or equal to (0.2dB) characteristics.
The CellGuard™ is a superior GPS surge protector to a gastube solution. The CellGuard™ is easy to install and offers superior protection for the GPS signal.
Outdoor RJ45 plug-in high speed data and DC power protector.
The GigaGuard™ is a top level high-speed data protector for tower top applications running CAT5/6 cable and Gigabit Ethernet and DC power from 12-72 Volts.
AirSmart™
Intelligent lightning protection system for remote electrical tilt antennas and power amplifiers.
Engineered for AISG compliant tower top applications. The AirSmart™ protection devices combine power, data, and RF signals at the bottom of the tower. The RF, data and power can be decoupled at the top for distribution to the antenna, amplifier.
SurgeBuss™
Flexible high surge current protector for 6, 12, 24, 48, 56, 72Vdc. The SurgeBuss™ can be configured to protect positive, negative, or floating ground configurations.
A new FCC mandate requires radio sites have power backup surge protection. The SurgeBuss™ is built specifically for DC battery & power backup protection.
The SpikeGuard™ protects antennas, microwaves, broadband access equipment, two-way radios and cellular infrastructure. Bulkhead mounted, 50 Ohm, dc-blocked, coaxial surge suppressor for radios operating between DC-7000 MHz.
The SpikeGuard™ straight gastube protector is ideal for applications that require dc voltage and operate across a wide range of frequencies.
The SpikeGuard™ can handle lower power levels of 90 Watts @ 30 MHz, 50 Watts @ 900 MHz, and 9
Watts @ 3,000 MHz. This product exhibits excellent insertion loss and VSWR characteristics at this protection level.